HP Deskjet 2600 printer’s setup | hp.com/go/dj2600setup | +1-844-688-4484

The HP DeskJet 2600 is an exemplary all-in-one printer. It allows you to print, scan and make xerox copies of documents without the bickering of wires or cords. The agility of the HP DeskJet printer is great for the price the device comes under. Had there been a touch screen in the same, it would have been a trend setter among its peers. In this article hereby we will be exploring the instructions on how to get the HP DeskJet 2600 wireless printer setup. This guide will prove to be of great help no matter if you are a beginner at setting this up or have done this before but have lost the recollection of the steps. Please adhere to the under discussed steps in order to get the HP Deskjet 2600 printer setup. 

Getting the HP DeskJet 2600 wireless printer setup:-

Confirm the following before you get ahead in the process of setting up HP DeskJet 2600 wireless printer:-

• That a wireless network is in collaboration with your computing device.

• That all the prerequisites of the printer are already done, like the papers are loaded, ink cartridge is checked and installed.

• The computing device and the printing device is within the accessible range of the router for which will be crucial for the setup.

Setting up the Printer:-

Step 1: Get the printing device out of the box in which the same was delivered to you. 

Once you get the printer out of the package, ensure that you have gotten every tape, sticker, any adhesives or packaging material removed from the printer. 

1. Expel the printing device out of the package. 

2. Clear away all the tapes and adhesives from the exteriors of the printer. 

3. Curtail the output tray, swing inside the printer, hold onto the handle and lower the ink cartridge to get the same opened up. 

4. Ensure that there is nothing of importance in the insides of the packaging box before you turn to throw or discard the same. 

Step 2: Plug in the power cord

Get the printing device in contact with a source of electrical power for it to get turned on. 

1. Get the power cord plugged into the end of the printer where it is supposed to get plugged in, and get the other end of it into a power outlet. 

2. Turn on the printing device by pressing the power button on the device. 

3. You have to wait until the device gets silent and only then can you continue any further. 

Step 3: Getting the ink cartridges installed.

1. Get one of the cartridges out of the box and be careful how you hold and handle the same. Look for instructions if you are skeptical about the ways to hold the cartridge as it will get damaged if you happen to hold it in an improper way. 

2. Expel the plastic tape from the ink cartridge of HP DeskJet 2600 wireless printer.

Step 4: Load paper into the input tray

Step 5: Install the printer software

1. Now, you are all done with setting up each and every hardware needs of the device, you are just now required to get the necessary software installed in order to get the printing device to work. 

2. Get the newest addition of the printing software downloaded online from the web address : hp.com/go/dj2600setup.

In case the issue still remains, please get in touch with the technical experts on +1-844-688-4484 for instant assistance on the issue to get resolved.